12 Inch Cabinet Pulls

These 12 inch cabinet pulls include a 320 mm center-to-center option, usually labeled 12-3/5 inches. That spacing is about 12.6 inches, not exactly 12 inches. For replacement hardware, remove one pull and measure between the centers of the two screw holes before ordering. Overall handle length varies by design.

Start with the hole spacing

Remove one existing pull and measure from the center of one screw hole to the center of the other. An exact 12-inch spacing is 304.8 mm. Products in this collection offer a 320 mm option, which measures about 12.6 inches and is usually labeled 12-3/5 inches. A 320 mm pull will not fit holes spaced exactly 12 inches apart.

Select the 320 mm option

Most products come in several sizes. Choose the variant marked 12-3/5 inches or 320 mm. Do not rely on the collection name, main image, or overall handle length when matching existing holes.

Check the drawer or door width

With 320 mm between the mounting screws, these are long pulls suited to wide drawer fronts and tall cabinet or wardrobe doors. They cannot fit a 12-inch-wide drawer because the mounting holes alone are about 12.6 inches apart. Check the full handle length and available space before ordering.

Read the product specifications

Materials, finishes, screw lengths, and package quantities vary by product. Some designs may also use a different mounting method. Review the selected size and package details on the individual product page.

For measurement diagrams and more detailed instructions, see our Cabinet Handles & Pulls Measurement Guide.

FAQ

Are these cabinet pulls exactly 12 inches center-to-center?
No. Products in this collection offer a 320 mm center-to-center option, usually labeled 12-3/5 inches. An exact 12-inch spacing is 304.8 mm.
Will a 320 mm pull fit holes spaced exactly 12 inches apart?
No. The two measurements differ by 15.2 mm, so the mounting screws will not line up without drilling new holes.
Does 12 inches refer to the overall handle length?
No. The collection name refers to the size category and available hole-spacing option. Overall handle length varies by design and is usually longer than the center-to-center measurement.
Can I use these pulls on a 12-inch-wide drawer?
No. A 320 mm pull has mounting holes about 12.6 inches apart, so it requires a drawer or door wider than 12 inches. Remember to allow room for the ends of the handle as well.
Do the pulls include mounting screws?
Many products include mounting screws, but the lengths and quantities vary. Check the individual product listing for the exact package contents.